Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S ECO 776SE BC40 - ASA - INEOS Styrolution

Material Data Center offers the following functions for Luran® S ECO 776SE BC40:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 53 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 40 %
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 4 cm³/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2200 MPa ISO 527
Carico unitario a trazione 47 MPa ISO 527
Deformazione a snervamento 3.3 % ISO 527
Deformazione nominale a rottura 12 % ISO 527
Modulo a flessione, 23°C 2000 MPa ISO 178
Resistenza alla flessione 65 MPa ISO 178
Resistenza all'urto Charpy, +23°C 260 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 30 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 4 kJ/m² ISO 179/1eA
Ball indentation hardness 70 MPa ISO 2039-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 96[ann.] °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 101[ann.] °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 92 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 95 E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
Velocità di avanzamento fiamma, FMVSS, spessore 1mm 25[1] mm/min ISO 3795 (FMVSS 302)
Other Standards[S]
Conduttività termica, stato solido 0.17 W/(m K) DIN 52612-1
1: 2 mm  S: These properties are reported by the producer according standards that are different to our defaults.  ann.: annealed
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 1.65 % Sim. alla ISO 62
Assorbimento d'umidità 0.35 % Sim. alla ISO 62
Massa volumica 1070 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 200 - 250 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche speciali
Alto urto o modificato all'urto, Estab. agli U.V. o per applicaz.in esterni
Resistenza Chimica
Resistenza chimica generale
Certifications
Contiene risorse rinnovabili, ISCC Plus
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.